Atop Technology SE5001 Series User Manual
Page 17
Advertising
User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
16
Figure 3.5 Main menu
Note:
1. If SE5001 does not receive any commands within 1 minute, Telnet connection will terminate automatically.
2. After
“0. Exit” is selected, the console will ask the user to save the configurations.
3. Changes to networking parameters will take effect only SE5001 is restarted.
->
Select “1” from “Input choice and enter (0~4):” to enter “Overview” (Figure 3.6):
Figure 3.6 Overview
This page gives one the general information of SE5001 including IP and MAC address, SNMP information, kernel
and AP version, and connection status of the device.
Advertising