Atop Technology SE5001 Series - Manual (Page 94)

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
93
Figure D.16 WebUI of the Serial Device Server
Configure by Telnet
Select “Config by Telnet” in the submenu or click the on the Telephone button in the toolbar to launch the
telnet console connecting to the device.
Option
Configure SerialManager preferences in this dialog:
1. Set the SerialManager ’s scan interval
2. If device tip option is turned on, SerialManager will show additional information when the mouse cursor
stays on the device.
3. Select which Network Interface Card that SerialManager uses. If this option is set to DEFAULT,
SerialManger will use the default NIC that the operating system assigns.