Atop Technology SE5001 Series - Manual (Page 81)

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
80
Appendix D: Using SerialManager Utility
D.1 SerialManager utility Introduction
SerialManager, the utility developed by ATOP, is a special tool for device management and configuration. It
can realize the daily management of various ATOP network devices for address search, device positioning,
parameter configuring, and firmware downloading. Note that SE5404D is used to demonstrate the
functionality of SerialManager instead of SE5001.
D.2 Interface
The operating interface of the SerialManager utility is shown below:
Figure D.1 GUI of SerialManager
Caution Field Description
! IP conflict. There are two devices with the same IP address in the network.
@ The device is using DHCP.
< The device is being located.
+ Logged into the device.
? MAC conflict. There are two devices with the same MAC address in the network.
Other than the type of Application loaded and its versions, the last few characters of the AP information will show
the AP connection status. The number of letters displayed depends on the number of COM ports that the serial
device server has. For example, AP information will show
“….. AS” meaning that the serial device server has two
COM ports. The first COM port is in TCP Server mode and is connected to a TCP client, while the second COM
port is not connected.
AP Information Description