Atop Technology SE5001 Series - Manual (Page 20)

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
19
3.2.5. Configure SE5001 as TCP server
Figure 3.10 Link Mode: TCP Server Setup
 Type 1 (Link Mode) from “Input choice and enter (1~4):” of COM1
 Type 1 (TCP Server) in the “Input choice(1~5) and enter：”
 Input local port in the “Please input local port：”
To Enable IP filter：
 Input y in the “Do one want to enable IP filter(y/n)?” to enable IP Filter. Otherwise input n.
 Input source IP in the “Please input Filter_IP ：”
 Double click “Enter” key
 Input idle time in “Please input idle time to send TCP alive packet(x*10sec)：”(ex. Input 2 to change the
sending TCP keep alive packet period to 20 sec)
Note:
1. IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.
2. IP filter is disabled by default