Atop Technology SE5001 Series - Manual (Page 91)

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
90
Destination IP and Port: This is the IP and the port that the COM port should connect to (TCP Client and
UDP only).
IP Filter: Enable this option to restrict network access of this COM port to a specific IP Address (TCP Server
only).
Enable Virtual COM Mode: Enable or Disable Virtual COM application on this COM port.
COM property: Select or enter the desired parameters, including alias name, serial port type, baud rate,
data bit, stop bit, parity, flow control, packet delimiter, and serial buffer control. The options vary depending
on the model you have.
Locate
To locate a device, select Locate in the submenu or click on the Locate button in the toolbar. Use this
function to locate a device that shows up in the SerialManager, but its location is unknown. A located device
would beep until it is de-located by pressing the Locate again.
Reboot
To reboot a device, select Reboot in the submenu.
Import Setting
If there are a lot of devices to manage, it should be easier to utilize the export and import function to import
similar settings to multiple devices all at once. Import the configuration file by selecting Import setting in the
submenu or by clicking the Import setting button on the toolbar. The Import Settings dialog is shown below.