Atop Technology SE5001 Series - Manual (Page 51)

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
50
4.2.2 Running Serial/IP in Windows
Find Serial/IP Control Panel from:
 Start->All Programs-> Serial/IP->Control Panel
 In the Windows Control Panel, open the Serial/IP applet.
 In the Windows notification area (Figure 4.5), right click in the Serial/IP tray icon and click on Configure
to open the Control Panel.
Figure 4.5 Serial/IP Notification Tray Icon
If no Virtual COM port is selected, a dialog will pop up and asks to select at least one port as the Virtual COM port
before proceeding (Figure 4.6).
Figure 4.6 Select Virtual COM Ports
After at least one Virtual COM port is seletected, the Control Panel will show (Figure 4.7).