Atop Technology SE5001 Series - Manual (Page 8)

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
7
Optional Accessories
Name Part Number Description
DK-25 30200000000022G DIN-Rail Kit
UN305-0510(US-DC) 50500051500001G
DC jack (1.35/3.5/7.5 mm) power adaptor,
100-240VAC input, 1.0A @ 5 VDC output, US plug
UNE305-0510(EU-DC) 50500051500011G
DC jack (1.35/3.5/7.5 mm) power adaptor,
100-240VAC input, 1.0A @ 5 VDC output, EU plug
US315-12(US-TB3) 70100000000027G
3-pin Terminal block (5.08 mm) power adaptor,
100-240VAC input, 1.25A @ 12VDC output, US plug
USE315-12(EU-TB3) 70100000000028G
3-pin Terminal block (5.08 mm) power adaptor,
100-240VAC input, 1.25A @ 12VDC output, EU plug
1.3 Application Connectivity
TCP Server Mode： SE5001 can be configured as a TCP server in TCP/IP Network to listen for an incoming TCP
client connection to the serial device. After the connection is established between the serial device server and the
host computer, data can be transmitted in both directions. This also applies to Virtual COM running in the server
mode.
Figure 1.1 TCP Server Mode
TCP Client Mode： SE5001 can be configured as a TCP client in TCP/IP Network to establish a connection with
a TCP server in the host computer. After the connection is established, data can be transmitted between serial
device and host computer in both directions. This also applies to Virtual COM running in the client mode.