Atop Technology SE5001 Series User Manual
Page 90
Advertising
User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
89
Figure D.13 COM Settings Pop-up Dialog
Note: COM tabs: Generated automatically according to the COM port number of the device. If a device has
4 COM ports, there will be, for example, 4 tabs, COM1, COM2, COM3, and COM4.
Link mode: This is to setup the COM port in TCP Server, TCP Client or UDP modes.
Local Port: This is the port that the COM port is listening to (TCP Server and UDP modes only).
Advertising