Atop Technology SE5001 Series - Manual (Page 32)

User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
31
Figure 3.24 Security Setup
Please enter the old password in the “Old Password” field and enter the new password in the “New Password”
and the “Verified Password” fields. Then click on the “Save Configuration” to save and apply the new password.
Note: Press the reset button next to the RJ-45 Jack to reset the settings back to the default value.
3.3.4. Backup EEPROM to Flash
This backup function could recover settings from the Flash to the EEPROM if the settings in the EEPROM are lost.
If SE5001 detects that there is an EEPROM backup in the flash. It will compare the backup values in the Flash and
EEPROM. If the values do not match, it will write the backup settings in the Flash to the EEPROM. To enable this
function, follow Figure 3.24 in the Security Settings.
 Click on Backup EEPROM to back up the settings from the EEPROM to the Flash. SE5001 would then
show Have Backup.
 Click on Erase Backup to erase the settings stored in the Flash. SE5001 would then show No Backup.
3.3.5. Link Mode Configuration