Com configuration, N figure 3.36 – Atop Technology SE5001 Series User Manual
Page 44
Advertising
User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
43
Figure 3.36 Multi-Point TCP Pair Connection
3.3.19. COM Configuration
Configure serial settings in this page (Figure 3.37). Note that these settings need to match the ones in the serial
device.
Alias Name:
This field is for identification purpose only.
Baud Rate:
Select one of the baudrates from the dropdown box, or select Other and then enter the desired baudrate in the
input box. Baudrates higher than 230400bps are not supported.
Parity / Data Bits / Stop Bits:
Configure them accordingly.
Flow Control:
Advertising