Comelit MT 49804 - Manual (Page 18)

User’s Manual
8
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit takes approximately 60 seconds
to initialize.
Initial Unit Setup
Before using your DVR for the first time, you will want to establish the initial settings. This
includes items such as time and date, display language, camera, record mode, network and password.
Your DVR can be set up using various screens and dialog boxes.
Throughout the screens you will see . Highlighting the and pressing the (Enter) button
on the remote control gives you the opportunity to reset that screen to its default settings. After
you are finished with any setup screen, you can highlight Save and press the button to save
the changes and exit the screen. If you do not wish to save the changes, highlight Cancel and
press the button to exit the screen.
Press the Menu button on the remote control or move the mouse pointer to the top of the screen
and then select (Login) in the Live Monitoring menu to enter the setup screens. The Login
screen appears.
NOTE: If you cannot use the remote control buttons, click the button using the mouse
to enter a password, and the virtual keyboard displays. See instructions below for using
the virtual keyboard.
NOTE: To log the user out of the system, press the Menu button on the remote control or
move the mouse pointer to the top of the screen and then select (Logout) in the Live
Monitoring menu. The Logout screen displays asking you to confirm whether or not you
want to log out the current user.
Figure 5 ņ Logout screen.
Figure 4 ņ Login screen.
Enter the password by pressing the appropriate combination of Camera
number buttons and then the button. There is no default password
when logging in for the first time.
NOTE: To assure the secure management of the system,
setting up a password is strongly recommended.