Comelit MT 49804 - Manual (Page 20)

User’s Manual
10
Highlight the box beside System ID and press the button. Change the number by highlighting
it and using the Up and Down arrow buttons to increase and decrease the number from 0 to 99.
NOTE: It is possible to have multiple DVRs with System ID 0 that are in the same area. If
this is the case, all will be controlled at the same time when using the infrared remote control.
Highlight the box beside Language and press button. A drop-down menu displays the available
languages. Highlight the desired language and press the button.
The box beside Version displays the software version of the DVR.
To upgrade the software, connect a USB flash drive containing the upgrade package file to the DVR.
Highlight the Upgrade… box and press the button. The Upgrade screen appears.
Highlighting the Install button and pressing the button will install the selected software package.
Highlighting the Cancel button and pressing the button will close the window without upgrading
the software. If the upgrade package file is not installed on the DVR properly, you will get an
error message.
CAUTION: The system restarts automatically after completing the upgrade, and it
takes approximately one minute to restart. Do NOT remove the USB flash drive until
the DVR restarts, otherwise the system upgrade will not be completed properly.
CAUTION: The USB flash drive must be FAT16 or FAT32 format.
Select the desired setup file and press the Import button to import the selected settings and change
the DVR settings accordingly. Highlight Include Network Setup and press the button to toggle
between On and Off. When set to Off, the network settings will not be changed.
Figure 8 ņ Information setup screen.
In the Information screen, you can name the
site location, assign a System ID number, select
the language the screens are displayed in,
display software version number, upgrade the
software, show the System Log, change a
password, display recorded time data, and clear
all data.
Highlight the Site box and press the button.
A virtual keyboard appears that you can use to
enter a Site Name. Once you have entered your
title, highlight Close and press the button.
The screen displays the upgrade package file names that are
available. The “.rui” indicates that the file is for software upgrades.
Select the desired file and press the button.
You can import saved DVR settings or export the
current DVR settings. To import saved DVR settings,
connect the USB flash drive containing the setup file
(.dat) to the DVR. Highlight the Setup – Import…
box and press the button.