Appendix, Webguard, Operating system: microsoft – Comelit MT 49804 User Manual
Page 55: Windows, 2000, microsoft, Xp, microsoft, Vista or microsoft, Cpu: intel pentium iii (celeron) 600mhz or faster, Ram: 128mb or higher, Internet explorer: version 6.0 or later
Digital Video Recorder art. 49804
45
Appendix
WebGuard
WebGuard allows you to access a remote DVR, monitor live video images and search recorded
video using Internet Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
y
Operating System: Microsoft
®
Windows
®
2000, Microsoft
®
Windows
®
XP, Microsoft
®
Windows
®
Vista or Microsoft
®
Windows
®
7
y
CPU: Intel Pentium III (Celeron) 600MHz or faster
y
RAM: 128MB or higher
y
VGA: 8MB or higher (1024x768, 24bpp or higher)
y
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC. You can run the WebGuard program by entering the
following information in the address field.
–
“http://IP address:port number” (The DVR IP address and the WebGuard port number (default:
12088) set in the Network setup screen (WebGuard tab))
–
Or, “http://DVRNS server address/DVR name” (The DVRNS server address and the DVR name
registered on the DVRNS server)
–
Or, “http://www.dvronline.net” (Entering the DVR IP address or the DVR name will be required
when logging in)
NOTE: You will need to get the appropriate IP address for the DVR you want to connect to
and the WebGuard port number from your network administrator.
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other
browsers.
You will need to enter the DVR IP address in the DVR ADDRESS field when running the
WebGuard program by entering http://www.dvronline.net. Selecting the Use DVRNS option
allows you to enter the DVR name registered on the DVRNS server instead of the IP address.
You must enter the DVRNS server address and port number in the SETUP setting when selecting
the Use DVRNS option.
NOTE: Do NOT close the LOGIN window during the WebGuard operation, otherwise, it will
cause a script error when switching between Web monitoring and Web search modes and
running the WebGuard program again will be required.
Select between the WEBWATCH (Web monitoring) and
WEBSEARCH (Web search) modes. Entering ID and
PASSWORD and clicking the [LOGIN] button logs in using
the selected mode.