Comelit MT 49804 - Manual (Page 21)

Digital Video Recorder art. 49804
11
Highlight the box beside File name and press the button. A virtual keyboard allows you to
enter the file name. Selecting Export will save the current settings in .dat file format on the USB
flash drive.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related
settings (Date/Time, Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB flash drive must be FAT16 or FAT32 format.
Highlight Show System Log… and press the button to display the System Log.
To export the system log information, connect the USB
device to the DVR. Highlight Export… and press the
button.
Highlight the box beside File name and press the button. A virtual keyboard allows you to
enter the file name. Selecting Export will save the log information in .txt file format on the USB
device.
NOTE: When opening the saved .txt file, setting to the proper character encoding and using
fixed width fonts will be required to read the file properly.
NOTE: In addition to using the remote control buttons, you can use the virtual keyboard
to assign the password. To display the virtual keyboard click the
button using the
mouse.
The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear All Data… and pressing the button will clear all video data. You will be
asked to verify that you wish to clear all data before the DVR erases the video data. Clear All
Data… will not clear the System Log.
To export the current DVR settings, connect the USB
flash drive to the DVR. Highlight Setup – Export…
and press the button.
The System Log screen lists system activities
(up to 5,000 from the latest) that have occurred
along with the time and date. The icon will
be displayed in the last column for system
activities of the remote site. You can scroll
through the log pages by using the Up and Down
arrows, or you can go directly to a log page by
entering the log page number in the box at the
bottom left of the screen. Highlight Close and
press the button to exit the screen.
Highlight Change Password… and press the button. To change
a password, highlight the Password box and press the
button.
You can use camera buttons 1 to 4 on the front panel to assign the
password. The password can be up to 8 digits. You will be asked
to confirm the password.