Comelit MT 49804 - Manual (Page 59)

Digital Video Recorder art. 49804
49
ཥ Click the to set up the image drawing mode and OSD display. You can change the display
speed by adjusting the image drawing mode, and select OSD information to display on the screen.
ས Click the to reload the recording data.
ཧ The timetable displays recorded data of the selected camera by time (in hour segments).
ས Selecting a camera on the screen and clicking the right mouse button displays the text menu
screen.
y Change Camera Title: Changes the camera name.
y Aspect Ratio: Changes the image aspect ratio.
y
Deinterlacing: Using a deinterlace filter for interlaced video enhances image
display quality by eliminating horizontal scan lines and noise in areas with motion.
y Anti-Aliasing Screen: Enhances image display quality by eliminating stair
stepping (aliasing) effects in the enlarged image.
NOTE: A camera name change in the Web Search mode does not affect the camera name
set up on the remote site. Leaving the Camera Title blank causes the camera name set up
on the remote site to display.
Time Overlap
If the DVR’s time and date have been reset to a time that is earlier than the existing recorded video,
it is possible for the DVR to have more than one video stream in the same time range. In this
case, you can search overlapping video streams individually by selecting a specific segment. For
example, when the DVR has recorded video from one to five o’clock and the user changes the
time backward from five to three o’clock and then continues recording until six o’clock, there will
be two video streams and segments from three to five o’clock.
You can search overlapping video streams by selecting a specific time or time
range. If you want to search recorded video at four o’clock during the overlapping
time range using a search menu such as Go to the Date/Time, select the
segment you want to search.
If you want to search recorded video from four to five o’clock during the overlapping time range
using a search menu such as Event Log Search or Calendar Search, it is possible for the DVR
to have two overlapping start and stop times. You will be asked to select one of the overlapping
start and stop times from the search time ranges as follows:
y From four o’clock of the first segment to five o’clock of the first segment
y From four o’clock of the first segment to five o’clock of the second segment
y From four o’clock of the second segment to five o’clock of the second segment