Comelit MT 49804 - Manual (Page 46)

User’s Manual
36
NOTE: The Live Monitoring menu also can be displayed by moving the mouse pointer to
the top of the screen.
Live Monitoring Menu
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen.
It is the same as pressing the (Enter/Pause) button on the remote control. Selecting again
in the Live Monitoring menu or pressing a camera button on the remote control exits the Freeze
mode. While in the Freeze mode, the icon displays in bottom-left corner if Freeze is selected
in the Display setup screen (OSD tab).
Sequence
Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially.
It is the same as pressing and holding the Menu button on the remote control for three seconds
or longer. Selecting again in the Live Monitoring menu exits the Sequence mode. While in
the Sequence mode, the icon displays in bottom-left corner if Sequence is selected in the Display
setup screen (OSD tab). If all the cameras in a page are Off or have lost video, that page will be
excluded from the sequence.
Camera Menu
Selecting (Camera Menu) in the Live Monitoring menu displays the following Camera Menu.
y Color Control: Selecting Color Control and choosing the camera number allows you to control
brightness, contrast, hue and saturation for each camera for the selected camera if a user who
has Color Control authority logs into the system. It is the same as pressing and holding a camera
button for a few seconds.
NOTE: It is important that cameras and monitors are correctly installed and adjusted prior
to making any image adjustments using the DVR’s controls.
NOTE: Any image adjustments you make will be applied to both the live video on the
monitors and the recorded video.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the
screen while in the live monitoring mode.
Setup
Selecting (Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to Chapter
3 ņ Configuration for detailed descriptions of system setup.
Search Mode
Selecting (Search Mode) in the Live Monitoring menu exits the live monitoring mode and enters
the search mode. It is the same as pressing the Playback Mode button on the remote control.
y Zoom: Selecting Zoom and choosing the camera number zooms the current image
of the selected camera on the screen. It is the same as pressing the
Zoom button
on the remote control. Selecting Zoom again in the Camera Menu again exits
the Zoom mode. Refer to the following Zoom Mode section for details.