Comelit MT 49804 - Manual (Page 23)

Digital Video Recorder art. 49804
13
Storage
Highlight Storage in the System menu and press the button. The Storage setup screen appears
and displays information about the DVR’s storage devices.
The Information column displays whether the device is being used or not. Other indicates the
device has been used for another DVR.
Highlight the Status tab, and the Storage Status setup screen displays.
Figure 11 ņ Storage Information setup screen.
The information in the Type column describes
the storage device.
The capacity of the storage device is displayed
in the Capacity column.
The Format column displays whether the
device is used for recording (Record) or not
(Not Using). Not formatted indicates the
device is not formatted.
Highlight the box in the Format column for the desired storage device
and press the button. You will be able to format the device for
recording. When selecting Not Using from Use As and highlighting
the Format button, the device will not be used for recording.
Highlight the box in the Information column for the desired
storage device and press the button. The box beside
Recorded Data – From / To displays the time information
of recorded data. Highlighting Clear and pressing the
button will clear all video data. You will be asked to verify
that you wish to clear all data before the DVR erases the
video data. Clear All Data… will not clear the System Log.
Figure 12 ņ Storage Status setup screen.
The Type column displays the type of storage
device.
The Disk Bad column displays the percentage
of bad sectors. Not formatted indicates the
device is not formatted.
The Temperature column displays the
temperature of the storage device.
y Good – The temperature is normal.
y Bad – The temperature is 70 o C (158 o F) or higher.
y N/A – The DVR cannot read the temperature.