Comelit MT 49804 User Manual
Page 50
User’s Manual
40
Search Menu
Search
Selecting
(Search) in the Search menu displays the following Search menu. See the following
Event Log Search and Calendar Search sections for details.
y
Event Log Search: Selecting Event Log Search selects video from the event
log.
y
Calendar Search: Selecting Calendar Search searches using a calendar.
Go To
Selecting
(Go To) in the Search menu displays the following GO TO menu.
y
Go to the First: Selecting Go to the First displays the first recorded image.
y
Go to the Last: Selecting Go to the Last displays the last recorded image.
y
Go to the Date/Time: Selecting Go to the Date/Time displays the Go to
the Date/Time screen.
Move the cursor over the date and time and press the (Enter) button.
You can use the Left and Right arrow buttons to highlight the year,
month, day, hours, minutes and seconds. Use the Up and Down arrow
buttons to change to the date and time you want to search for video.
Once you have set the date and time you want, press the
button. Then highlight Go and press
the button. The selected date and time will display. (If no video was recorded during the
selected time, a message appears alerting you that no image was recorded at that time.) The
button and arrow buttons can now be used to review the surrounding video.
Export
Selecting
(Export) in the Search menu displays the following Export menu. See the following
Clip Copy section for details.
y
A–B Clip-Copy: Selecting A–B Clip-Copy will set the starting point of the video
to be clip copied, and the icon displays at the bottom-left corner of the screen.
Selecting A–B Clip-Copy again will set the ending point of the video to be clip
copied and displays the Clip-Copy screen.
y
Clip-Copy: Select Clip-Copy, and the Clip-Copy screen appears to allow clip
copy setup.
Camera Menu
Selecting (Camera Menu) in the Search menu displays the following Camera Menu.
y
Zoom: Selecting Zoom and choosing the camera number zooms the current
playback image of the selected camera on the screen. It is the same as pressing
the
Zoom
button on the remote control. Selecting Zoom again exits the Zoom
mode.
y
Enable De-Interlace: Selecting Enable De-Interlace turns the de-interlace
filters on.