Comelit MT 49804 - Manual (Page 53)

Digital Video Recorder art. 49804
43
NOTE: The time bar is in one-hour segments. If a segment is highlighted, it means that
some video was recorded during that hour. However, it does NOT mean video was recorded
for the entire hour.
If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it
is possible for the DVR to have more than one video stream in the same time range. Move to
Select a Segment, and select the video stream you want to search. Refer to the Appendix – Time
Overlap for further information on searching time-overlapped video streams.
NOTE: The lower number of the Segment indicates the latest recorded video.
Once you have set the date and time you want to search, highlight Go and press the button. The
selected date and time will display. The button and arrow buttons can now be used to review
the surrounding video.
NOTE: It is possible that no recorded image displays on the current screen. Change the
screen mode to 2x2, and you will be able to easily see the cameras that have recorded video
during target time.
Clip-Copy
Video clips can be copied on an external USB flash drive. The copied video clips can be viewed
on computers running Microsoft Windows 98, ME, 2000, XP or Vista.
Press and hold the Clip Copy button on the remote control for more than three seconds or select
Clip-Copy from the Export menu in the Search menu while in the Search mode, and the Clip-Copy
screen appears to allow clip copy setup.
Selecting A-B Clip-Copy from the Export menu in the Search menu during playback will set the
starting point of the video to be clip copied, and the icon displays at the bottom-left corner of
the screen. Selecting A-B Clip-Copy again from the Export menu in the Search menu will set
the ending point of the video to be clip copied by displaying the Clip-Copy screen.
Highlight the box beside Channels and press the button. You can select the cameras that you
would like to include in your video clip.
Highlight the box beside Password and press the button. A virtual keyboard appears allowing
you to enter the password for reviewing the video clips.
Figure 47 ņ Clip-Copy screen.
You can search video from the first to last recorded
images, or you can set the start and stop times and dates.
Highlight the box beside From and press the (Enter)
button to toggle between On and Off. When set to Off,
you can enter a specific Date and Time. When set to On,
the search will be from the first recorded image.
Highlight the box beside To and press the button to
toggle between On and Off. When set to Off, you can
enter a specific Date and Time. When set to On, the
search will be from the last recorded image.