Comelit MT 49804 - Manual (Page 42)

User’s Manual
32
Highlight the Actions tab, and the Video Loss Actions setup screen appears.
NOTE: For the Record action, the camera you select should be set to the Event or Time
& Event recording mode in the Record Schedule setup screen.
Highlight the box under the Notify heading and press the button. You can toggle the entire list
On and Off by highlighting Notification and pressing the button. You can toggle the individual
items On and Off by highlighting that item and pressing the button. Highlight OK and press
the button to accept your changes.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification
setup screen and the DVR should be registered in the RAS (Remote Administration System).
System Event
Highlight System Event in the Event menu and press the button. The System Event setup
screen appears.
Highlight the Setup... box beside Check Recording and press the button. The Check
Recording screen appears.
Figure 37 ņ Video Loss Actions setup screen.
The DVR can be set to react to video loss
differently for each camera. Each camera can
be associated with another camera and/or notify
a number of different devices.
Highlight the box under the Record heading
and press the button. A list of cameras
appears. You can associate as many cameras
with that camera as you wish. If the DVR
detects video loss on the selected camera, it
starts recording video from all the associated
cameras.
Figure 38 ņ Health Check setup screen.
The DVR can be configured to run
self-diagnostics and report the results.
Highlighting the box beside System and
pressing the button allows you to select the
interval that you want the DVR to run
self-diagnostics on the system. You can select
from 1 hr. to 30 days or Never.