Comelit MT 49804 - Manual (Page 26)

User’s Manual
16
Select the Finish button to finish the Quick
Setup Wizard and select the Go to Network
Setup button to start the Network Setup Wizard.
Figure 15 ņ Network Setup Wizard screen.
If you selected the Go to Network Setup, select
the Next button to start the Network Setup
Wizard.
Internet Connection
Select whether or not your DVR is connected
to the Internet.
LAN Setup
Select between Auto Configuration and
Manual Configuration for network
configuration, and then select the Test button
to test the network configuration you selected.
NOTE: Selecting Auto Configuration allows
the DVR to automatically obtain LAN
parameters (IP address, Gateway, Subnet
Mask and DNS Server address). Selecting
Manual Configuration allows you to set up
LAN parameters manually.