Comelit MT 49804 - Manual (Page 57)

Digital Video Recorder art. 49804
47
ཛ Click the to log out the WebGuard program.
ཛྷ Click the to access to the web search mode.
ཝ Position the mouse pointer on the WebWatch logo to see the version of the WebGuard program.
ཞ The DVR information window displays the login information of WebGuard.
ཟ Click the screen format to select the desired display mode. When changing the screen format,
the selected camera on the current screen will be located in the first cell of the new layout.
འ Click the camera button to select the camera to be viewed.
ཡ Click the to adjust the brightness, contrast, saturation and hue of
monitoring image.
ར Click the to save the current image as a bitmap or JPEG file format.
ལ Click the to set up the image drawing mode and OSD display. You
can adjust the display speed by changing the image drawing mode, and
select OSD information to be displayed on the screen.
ཤ The event status window at the bottom displays a list of events that were detected from the
remote site.
ཥ Selecting a camera on the screen and clicking the right mouse button displays the text menu
screen.
y
Change Camera Title: Changes the camera name.
y Aspect Ratio: Changes the image aspect ratio.
y Deinterlacing: Using a deinterlace filter for interlaced video enhances image
display quality by eliminating horizontal scan lines and noise in areas with motion.
y
Anti-Aliasing Screen: Enhances image display quality by eliminating stair
stepping (aliasing) effects in the enlarged image.
NOTE: A camera name change in the Web Watch mode does not affect the camera name
set up on the remote site. Leaving the Camera Title blank causes the camera name set up
on the remote site to display.
Web Search Mode
WebSearch is a remote web search program that allows you to search recorded video on the remote
DVR.
NOTE: The remote site connection in the Web Search mode will automatically be
disconnected if there is no activity for 30 minutes.