Comelit MT 49804 - Manual (Page 24)

User’s Manual
14
The S.M.A.R.T. column displays “Good”, “Bad” or “N/A”, depending on storage conditions.
y Good – The storage condition is normal.
y Bad – Data cannot be written on or read from the storage device.
y N/A – Storage conditions are normal, however, the S.M.A.R.T. monitoring is not working or supported.
NOTE: When the S.M.A.R.T. displays Bad, the screen displays a message box. Once the
“Bad” message displays, replacing the hard disk drive is recommended, usually within
24 hours.
NOTE: Temperature and S.M.A.R.T. information will be available only for internal hard disk
drives supporting the SMART (Self-Monitoring Analysis and Reporting Technology)
monitoring program.
Wizard
Highlight Wizard and press the button. The Setup wizard screen appears. The Setup wizard
guides you through configuring the system for basic operation.
NOTE: This Wizard screen can only be accessed when logged on as the admin user.
Figure 13 ņ Setup wizard screen.
Select either Quick wizard or Network wizard
and select the Next button to start the selected
setup wizard.
NOTE: Selecting the Cancel button
throughout the screens exits the Setup
Wizard without saving your changes and
returns to the main setup screen.
Figure 14 ņ Quick Setup Wizard screen.
If you selected the Quick wizard, selecting
the Next button starts the Quick Setup Wizard.