Comelit MT 49804 - Manual (Page 39)

Digital Video Recorder art. 49804
29
You can set the amount of time to record prior to the event by adjusting the Dwell. You can set
the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the fewer maximum ips can
be set.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings
and follows the time settings.
Event Setup
Figure 33 ņ Event menu.
Motion Detection
Highlight Motion Detection in the Event menu and press the button. The Motion Detection
setup screen appears.
Figure 34 ņ Motion Detection Settings setup screen.
Figure 32 ņ Pre-Event setup screen.
When the DVR is in the Event Record mode it
is possible to have it record images before the
event occurs. The Pre-Event screen allows
you to define how to handle pre-event recording.
You can turn individual cameras On or Off for
pre-event recording. The image speed can be
set from 0.10 to 30.00 ips (25.00 ips PAL), and
image quality can be selectable from Very
High, High, Standard and Basic.
Your DVR has built-in video motion detection.
Video motion detection can be turned On or Off
for each camera.