Comelit MT 49804 - Manual (Page 48)

User’s Manual
38
Previous Camera, Next Camera
Selecting or (Previous Camera or Next Camera) in the Mouse Display menu moves to the
previous or next camera.
OSD
Selecting (OSD) in the Mouse Display menu toggles OSD On and Off.
Recording Video
Once you have installed the DVR following the instructions in Chapter 2 ņ Installation, it is ready
to record. The DVR will start recording based on the settings you made in the Record setup screen.
See Chapter3 ņ Configuration.
Recycle On or Recycle Off. The factory default is Recycle On. It does this by recording over
the oldest video once the hard disk is full. Setting the DVR to Recycle Off causes it to stop
recording once the hard disk is full.
Standard (CIF), High (Half D1) or Very High (D1). The factory default resolution is Standard.
When set to Standard, the DVR has a maximum recording speed of 120 ips. When set to High,
the DVR has a maximum recording speed of 60 ips. When set to Very High, the DVR has a
maximum recording speed of 30 ips.
Although you will be able to record without changing the unit from its original factory settings,
you will want to take advantages of the DVR’s many tools. See Chapter 3 ņ Configuration for
detailed descriptions of the recording mode options.
Playing Recorded Video
If a user who has Search authority logs into the system, the user can view recorded image. Once
video has been recorded, you can view it by pressing the
Playback Mode button on the remote
control. When playing video for the first time, the DVR will display the most recent image. When
playing video subsequent times, the DVR will start playing video from the last recalled image.
Camera Buttons (1 to 4): Pressing the individual camera buttons on the remote control will
cause the selected camera to display full screen.
Arrow Buttons: Pressing the button on the remote control plays video backward at high speed.
Pressing the button again toggles the playback speed from
, and . Pressing the
button plays video forward at high speed. Pressing the button again toggles the playback speed
from ,
, and . When in the pause mode, pressing the button moves to the next
image and pressing the button moves to the previous image.
Pause Button: Pressing the button on the remote control pauses playing video.