Comelit MT 49804 - Manual (Page 38)

User’s Manual
28
Highlight the box under the Mode heading and press the button to change the recording mode
that will
be used. Choose from: No Record, Time, Event and Time & Event.
When the DVR is in the No Record mode, it will not record during the preset day and time range.
Use the No Record mode when you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode, the icon displays at the top-left corner of the screen.
The DVR
will record and displays the icon at the top-left corner of the screen during the
scheduled times.
When the DVR is in the Event mode, the red icon displays at the top-left corner of the screen.
The DVR will record and displays the icon at the top-left corner of the screen when any event
occurs. When the DVR is in the Pre-Event recoding mode, the yellow icon displays when
there is no event, and the DVR is not recording. When the DVR is in the Pre-Event mode, the
red and display when any event occurs and the DVR starts recoding.
When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the
icon displays. The DVR follows the Event settings and the icon displays.
Highlight the box under the Channels heading and press the button to select which cameras
will be recorded.
Highlight the box under the Settings heading and press the button to define the recording
settings. You can set the ips and Quality of the recording. If you do not set the ips and Quality
l in the Settings column, the DVR will follow the default settings. See below for details.
NOTE: Descriptions of the Record icons in the Type column are as follows:
Time-lapse (Time) Motion Video Loss
NOTE: Channels that are not defined will use the setting values of the previous
schedule item.
Highlight the box under the heading and press the button to delete the recording settings.
You will be asked to confirm that you want to delete the settings.
Highlight Default… and press the button. The Default screen appears.
Pre- Event
Highlight Pre-Event in the Record menu and press the button, and the Pre-Event setup screen
appears. If you do not have Event set up in the Record Schedule, a message will display alerting
you to this fact.
Highlighting boxes under ips and pressing the button allows you
to set the images per second for Time and Event recording. You can
select from 0.10 to 30.0 images per second. Highlighting boxes under
Quality and pressing the button allows you to set the recorded
image quality for Time and Event recording. You can select from:
Very High, High, Standard and Basic.