INFICON Protec P3000(XL) Helium Leak Detector - Manual (Page 26)

1-16
General Information
k
in
a
26
e Ch
ap
te
r
1
.fm
Tech
ni
ca
l Ha
nd
bo
ook
(1
20
9)
1.6.3 Electrical Connections
Notice The local regulations for electrical connections must always be observed
(in Germany VDE 0100). The mains voltage rating for the Protec P3000
can be read off from the name plate left of the power switch. The mains
voltage setting of the Protec P3000 is fixed and can not be changed. A
separate fuse for each of the mains conductors has been integrated into
the mains socket (
Fig. 1-9 /6).
The mains voltage is applied to the Protec P3000 via the detachable mains cable
which is supplied with the leak detector. A main power socket is available for this
purpose at the rear of the main unit.
Fig. 1-8 Installation of sniffer line holder
Fig. 1-9 Electrical connections
Pos. Description Pos. Description
1 Headphone port 4 Name plate
2 I/O Port 5 Power switch
3 RS232 interface 6 Power connector
Caution
Before connecting the Protec P3000 to the mains you must make sure that the
mains voltage rating of the Protec P3000 coincides with the locally available mains
voltage.
1 2 3 4 5 6