INFICON Protec P3000(XL) Helium Leak Detector User Manual

Page 59

Advertising
background image

Equipment Settings

4-4

k

in

a

26

e Ch

ap

te

r

4

.fm

Tech

ni

ca

l Ha

nd

bo

ok

(1

20

9)

Name
(Gas equivalent)

For displaying the leak rate in refrigerant equivalent leak rates go to the

EDIT

GAS

sub

menu and go to the

NAME

line item. Press the

EDIT

button and in the opening

GAS

SELECTION

submenu choose the refrigerant equivalent from the

GAS

LIBRARY

. Gas

parameters can be fully deleted by setting the gas name back to blank („<----->“).

Notice

If more than one set of parameter is set up (i.e. maximum two gases are
not named „<----->“) a list button will appear on the right side of the
measurement screen. When pressing the list button a short-cut to selecting
the different parameter sets will be provided.

Additional Helium

This submenu only is available when operating in gas equivalents. In this case the
Protec P3000 may display the Helium leak rate in addition to the refrigerant
equivalent leak rate in the main measurement screen. This feature may be selected
or not selected.

Default: not selected

Notice

The option “Additional He” is only available if at least one parameter set
(gas 1 … gas 4) is configured to helium.

The additional helium will be displayed in the unit of measurement of the
lowest gas number set to helium.

Fig. 4-3 Selecting additional Helium

Advertising