Lenze E94A - Manual (Page 134)

5 Function blocks
134
Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5 Function blocks
This chapter describes all function blocks (FBs) that are provided by the »Engineer« function block
editor for the "9400 Servo Drives".

Tip!
For an external access (e.g. from a master control) to the parameters of the parameterisable
function blocks: The Table of attributes contains information required for communication
to the controller via parameters. ( 656)

Note!
The grayed out area at the beginning of each FB description informs you on the function
library which contains the corresponding FB and provides information concerning the
"9400 Servo Drives" that can be used with the FB.