Lenze E94A - Manual (Page 19)

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
19
2 Introduction
2.3 Parameterisable function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameter list
• By clicking the icon the parameter list of a function block can be opened.
Wildcard "unit" for the real unit of the machine
The parameters for a travel profile (e.g. position, speed, acceleration and deceleration) are selected
in real units with regard to the slide, e.g. 1000 mm as relative position.
• The machine parameters of the drive interface (system block LS_DriveInterface) are used to de-
fine the real unit.
• This documentation uses the term "unit" in the parameter unit information only as a wildcard
for the real unit of the machine.
Resolution Value range Number of decimal positions
32 bits ± 214748.3647 4