Lenze E94A - Manual (Page 439)

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
439
5 Function blocks
5.114 L_PosSequencer - sequence control
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.114.3.1 Action type "Program end"
To define the program end in the sequence table, the action of type "Program end" is available.
Action call (entry in the sequence table)
(Leading zeros can be left out).
• If the input bStart is reset to FALSE while the positioning program is running, processing is only
continued until the program end has been reached.
• In the Lenze setting all entries of the sequence table are set to "0" and thus to "program end".
End
0