Lenze E94A - Manual (Page 49)

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
49
3 Working with the FB editor
3.3 Using the FB-Editor as "Viewer"
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Using the interconnection as an alternative parameterisation access
The following buttons serve to get to the parameterisation dialog or parameter list of an object:
3.3.1 Following connections of inputs and outputs
In addition to the Search function and the Overview window you can use the context menu of inputs
and outputs to follow connections and quickly reach certain signals.

How to navigate from one output to another connected input:
1. Open the context menu (right mouse button) of the port symbol at the output.
• If one output is connected to several inputs, three points ("...") are shown at the output
instead of the concrete input identifier.
• The context menu for the port symbol contains all inputs which are connected to the out-
put:
2. Select input in the context menu to which you want to navigate.
• As a result, the selected input is displayed in the centre of the drawing area (in this ex-
ample: Input DIGOUT_bOut2):
Command Function
Parameter... Open parameter list or parameterisation dialog of the function block.
• Only if function block is parameterisable.
Parameter... Open parameter list or parameterisation dialog of the system block.
Changing a value Display/change value of the user code.