Lenze E94A - Manual (Page 93)

Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
93
3 Working with the FB editor
3.6 Comparing interconnections
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.6 Comparing interconnections
This function will be available as of »Engineer« V2.9!
The comparison operation serves to compare function block interconnections for the device series
9400 within the project.
• In the project, it is distinguished between the status of the FB interconnection at the device up-
date updated last ("last compiled") and the current processing status in the FB Editor ("proces-
sing").
• An offline<>online comparison and the comparison of two online devices are possible.
• The comparison result can be output as simple text. This can be copied to the clipboard and used
for documentation purposes.

How to compare two FB interconnections:
1. Select the command Application dataCompare FB interconnections....
• The Compare FB interconnections dialog box is displayed:
• For comparing two interconnections, the left project view displays Application A with
only one selected device.
• The right project view with Application B selected for the comparison shows all devices
available in the project.
2. Select the applications to be compared in the project view represented on the left and right.
• In order to execute a comparison with an online device, select "Online" in one of the two
upper list fields. Then all available online devices are displayed for selection.
• If you select "Online" in one of the two upper list fields, you can also compare the inter-
connections of two available online devices.

Note!
Only applications can be compared which have been enabled in the FB editor!
Parameter values, comments, module positions, line representations, and connector vi-
sibilities are not compared.