Lenze E94A - Manual (Page 76)

3 Working with the FB editor
3.4 Creating/reconfiguring the interconnection
76
Lenze · 9400 function library · Reference manual · DMS 6.7 EN · 08/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
If both connection types are used for an output, the available connection lines are converted into
small yellow flags with an automatically assigned number:
[3-5] Example 3: Connection of an output once with port identifier, once with connection line
• Three points ("...") are shown at the output instead of the concrete input identifier.
• The context menu for the port symbol contains all inputs which are connected to the output.