Lenze PC-based Automation Industrial PC - Manual (Page 166)

Industrial PC | Parameter setting & configuration
Parameter reference
Industrial PC extension modules
166
L
2.5 EN - 01/2012
C1132
C1133
C1134
C1136
C1138
Parameter | Name:
C1132 | Bus load
Data type: UNSIGNED_32
Index: 23443
d
= 5B93
h
Specification of the average bus load. The bus load is calculated as follows: Bus load = Value in percent x 1000
Display range
(min. value | unit | max. value)
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1133 | Error counter
Data type: UNSIGNED_32
Index: 23442
d
= 5B92
h
Error counter since last initialisation of the CAN interface
Display range
(min. value | unit | max. value)
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1134 | Last error code
Data type: UNSIGNED_32
Index: 23441
d
= 5B91
h
Code of the last error that occurred
Display range
(min. value | unit | max. value)
; Read access Write access CINH PLC STOP No transfer
Parameter | Name:
C1136 | CAN node ID
Data type: UNSIGNED_8
Index: 23439
d
= 5B8F
h
Setting range (min. value | unit | max. value) Lenze setting
0 128 63
; Read access ; Write access CINH PLC STOP No transfer
Parameter | Name:
C1138 | Channel
Data type: UNSIGNED_32
Index: 23437
d
= 5B8D
h
Setting range (min. value | unit | max. value) Lenze setting
0
; Read access ; Write access CINH PLC STOP No transfer