Lenze PC-based Automation Industrial PC - Manual (Page 59)

2.5 EN - 01/2012
L
59
Industrial PC | Parameter setting & configuration
Programming with the »PLC Designer«
Basics
8 Programming with the »PLC Designer«
This chapter provides you with information on the programming of the control function of
the Industrial PC.
8.1 Basics
The »PLC Designer« is the PLC programming system to be installed on the Engineering PC.
The »PLC Designer« is one of the Lenze Engineering tools. The »PLC Designer« accesses the
IPC via Ethernet:
The »PLC Designer« serves to create PLC programs in the programming languages of IEC
61131. The IEC 61131 programming languages are:
 Instruction list (IL),
 Ladder diagram (LD),
 Function plan (FP),
 Structured text (ST),
 Sequential function chart (SFC),
 Function block diagram (FBD).

Further information on working with the »PLC Designer« can be found in the
documentation for the »PLC Designer«.