Lenze PC-based Automation Industrial PC - Manual (Page 87)

2.5 EN - 01/2012
L
87
Industrial PC | Parameter setting & configuration
Remote maintenance and diagnostics
telnet connection

How to establish a telnet connection to the Industrial PC:
1. Start the command line on the PC by means of which you want to log in,
2. Start buttonExecute,
3. Establish the telnet connection to the IPC: Start telnet <IP address> of the IPC.
4. The user name and password for the authentication must correspond to the data
stored in the user management, codes 101 to 170.
 Standard access data:
– login: admin
– Password: admin

Note!
Access via telnet must only be used for diagnostic purposes. Changing system
data may result in IPC faults.