Lenze PC-based Automation Industrial PC - Manual (Page 92)

Industrial PC | Parameter setting & configuration
Remote maintenance and diagnostics
Windows® CE functions
92
L
2.5 EN - 01/2012
12.4 Windows® CE functions
 During normal operation the Windows® CE functions are hidden on the Industrial PC.
All IPC functions can be controlled via the Engineering PC.
 For diagnostic purposes and maintenance activities you can use the standard functions
of the IPC operating system Windows® CE.
 You can access the Windows® CE functions
– Via the service mode if the Industrial PC is operated directly,
– Via a telnet connection with the corresponding administrator rights,

How to activate the user interface of Windows® CE on the Industrial PC:
1. Activate the service mode by keeping the <Shift> key pressed. There are two
possibilities of activating the service mode:
• <Shift>+<F4> starts the Control panel. The entry can be made via the on-screen
keyboard or via an optionally connected keyboard.
• When the green LED is blinking, you can start the Control panel with the
function key F1 on the monitor panel.
2. Start the Service command by double-click.