Lenze PC-based Automation Industrial PC - Manual (Page 32)

Industrial PC | Parameter setting & configuration
Commissioning
Configuring the Industrial PC
32
L
2.5 EN - 01/2012
3. Keep the icon pressed.
• The icon gets smaller and after letting go skips to the right upper corner.
4. Repeat step 3 times.
• Until the Accept button appears.
5. Press Accept.
4.5.2 Establishing an automatic dial-up connection
Further information on how to establish an automatic dial-up connection, remote
maintenance and diagnostics options can be found under:  Remote maintenance and
diagnostics
( 82)
In order to carry out a remote maintenance on the Industrial PC different mechanisms are
provided:
 Remote Access Service (RAS) connection
( 82)

telnet connection
( 86)
 FTP connection
( 88)
4.5.3 Entering the IP address of the Industrial PC
The Industrial PC has the following network settings by default:
 When the Industrial PC is commissioned for the first time, the desired
IP address must be entered.
Setting Value
IP address 192.168.5.99
Subnetwork 255.255.255.0
Default gateway 192.168.5.1