Lenze PC-based Automation Industrial PC - Manual (Page 60)

Industrial PC | Parameter setting & configuration
Programming with the »PLC Designer«
Configuration and parameterisation via the control application
60
L
2.5 EN - 01/2012
The completely created and compiled program is transferred to the Industrial PC with the
»PLC Designer«. On the Industrial PC the program can be executed by the
L-force Logic & Motion runtime software.
8.2 Configuration and parameterisation via the control application
For creating the control application diverse function blocks, like for example standardised
libraries with motion functions according to PLCopen, are provided.
Furthermore there are function blocks that are suitable for the access to parameters of the
Industrial PC.
The translated PLC program is loaded into the Industrial PC via the network by means of
the »PLC Designer«. There it can be processed by the operating software of the Industrial
PC.

Further information on working with the »PLC Designer« can be found in the
documentation for the »PLC Designer«.