Lenze PC-based Automation Industrial PC - Manual (Page 79)

2.5 EN - 01/2012
L
79
Industrial PC | Parameter setting & configuration
Replacing the Industrial PC
Removing the connected Industrial PC
11 Replacing the Industrial PC
Precondition
Only Industrial PCs of the same product type, e.g. CPCs (cabinet PCs), can be used for
replacement purposes.
 Removing the connected Industrial PC
( 79)
 Connecting the new Industrial PC
( 80)
 Adapting the »Engineer« project
( 81)
[11-1] Embedded line Industrial PC with 2 PCI module card slots
11.1 Removing the connected Industrial PC

Note!
The Industrial PCs have different designs. Connections and modules can only be
shown exemplarily.

Danger!
Electrical voltage! Switch the Industrial PC to a deenergised state before
removing the connected Industrial PC.

Note!
If »VisiWinNET®« is protected with a LIC file, observe the corresponding
information.