Lenze PC-based Automation Industrial PC - Manual (Page 52)

Industrial PC | Parameter setting & configuration
Web-based parameterisation with »WebConfig«
User interface
52
L
2.5 EN - 01/2012
7.4.2 Diagnostics/Command execution
Button Function
Displays parameters of the following areas:
• Diagnostics
• Logbook
In the Logbook area you can configure settings regarding the Logbook.
Further information on remote maintenance options
of the Industrial PC:
 Remote maintenance and diagnostics ( 82)
Displays logbook contents.
• Different filter settings display, for instance, only the oldest or only the
most recent logbook entries.
 Logbook ( 53)
Displays the commands to be executed of the Industrial PC. The available
commands can be found in the following section in code 18 ( C0018 )
 Parameters of standard devices ( 129)
Displays the following parameters for remote control purposes of the
Industrial PC:
• RAS settings
 RAS settings with the web-based parameterisation ( 84)
• FTP settings
 FTP settings with the web-based parameterisation ( 88)
• Telnet settings
 Settings of the web-based parameterisation ( 86)
Information on the parameters can be found in the following section:
 Parameters of standard devices ( 129)