Metal Sales Clip-Loc Installation - Manual (Page 2)

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 2/03
812.246.1935 (Corporate Offi ce) • www.mtlsales.us.com
1
CLIP-LOC
SAFETY
I
MPORTANT
I
NFORMATION
STUDY APPLICABLE OSHA AND OTHER SAFETY REQUIREMENTS BEFORE
FOLLOWING THESE INSTRUCTIONS.
The installation of metal roof systems is a dangerous procedure and should be supervised
by trained knowledgeable erectors. USE EXTREME CARE WHILE INSTALLING ROOF
PANELS. It is not possible for Metal Sales to be aware of all the possible job site situations
that could cause an unsafe condition to exist. The erector of the roof system is responsible
for reading these instructions and determining the safest way to install the roof system.
These instructions are provided only as a guide to show a knowledgeable, trained erector
the correct parts placement one to another. If following any of the installation steps would
endanger a worker, the erector should stop work and decide upon a corrective action.
Provide required safety railing, netting, or safety lines for crew members working on
the roof.
Do not use the roof panel as a walking platform. The roof panels will not withstand the
weight of a person standing at the edge of the panel.
Do not stand on the roof panel at the ends until the panels have been attached.
The application and detail drawings in this manual are strictly for illustration purposes and may not be
applicable to all building designs or product installations. All projects should conform to applicable
building codes for that particular area. It is recommended to follow all building regulations and standard
industry practices.
Metal Sales Manufacturing Corporation is not responsible for the performance of the roof system if it is
not installed in accordance with the suggested instructions referenced in this manual. If there is a con-
fl ict between this manual and the actual erection drawings, the erection drawings are to take precedence.
Prior to ordering and installing materials, all dimensions should be verifi ed by fi eld measurements.
Metal Sales reserves the right to modify, without notice, any details, recommendations or suggestions.
Any questions you may have regarding proper installation of the Clip-Loc roofi ng system should be
directed to your Metal Sales representative, see pages 2 and 3.
Consult Metal Sales for any additional information not outlined in this manual.
This manual is designed to be utilized as a guide when installing Clip-Loc roofi ng system. It is the
responsibility of the erector to ensure the safe installation of this product system.