Clip-loc – Metal Sales Clip-Loc Installation User Manual
Page 30
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 2/03
812.246.1935 (Corporate Offi ce) • www.mtlsales.us.com
29
CLIP-LOC
R
AKE
(O
PTIONAL
) O
VER
D
ECKING
Clip-Loc panels must be installed prior to rake installation (see pages 21-22).
1. Position and install Cleat to wall with appropriate fastener, 1'-0" o.c. Make sure Cleat installation allows for proper Clip-Loc
Rake attachment.
2. Apply a row of Double Bead Tape Sealant across top of Clip-Loc panel rib.
3. Install Clip-Loc Rake flashing by sliding open hem onto Cleat and resting the Clip-Loc Rake flashing on top of panel rib.
Fasten through Clip-Loc Rake, sealant, and roof panel with ¼-14 x
7
/
8
" Stitch XL 1'-0" o.c.
4. If two or more flashings are required, lap the flashing over the previously installed flashing by a minimum of 2" placing a bead
of tube sealant between the flashings and securing with pop rivets 2
1
/
2
" o.c.
Double Bead Tape Sealant
#
1
/
4
-14 x
7
/
8
" Stitch XL (1'-0" o.c.)
Clip-Loc Panel
Moisture Barrier (by others)
Cleat
#10-12 x 1" PHW (1'-0" o.c.)
Clip-Loc Rake
1:12 Slope
Minimum
INSTALLATION NOTES