Metal Sales Clip-Loc Installation - Manual (Page 28)

© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 2/03
812.246.1935 (Corporate Offi ce) • www.mtlsales.us.com
27
CLIP-LOC R
AKE
(O
N
M
ODULE
) O
VER
D
ECKING
Clip-Loc Floating Rake Zee and Clip-Loc panels must be installed prior to rake installation (see pages 21-22).
1. Position and install Cleat to wall with appropriate fastener, 1'-0" o.c. Make sure Cleat installation allows for proper Clip-Loc
Rake attachment.
2. With Clip-Loc panel properly nested over top of Clip-Loc Floating Rake Zee, apply a row of Double Bead Tape Sealant across
top of panel rib.
3. Install Clip-Loc Rake flashing by sliding open hem onto Cleat and resting the Clip-Loc Rake flashing on top of panel rib.
Fasten through Clip-Loc Rake, sealant, roof panel, and into Clip-Loc Floating Rake Zee with ¼-14 x
7 /
8
" Stitch XL 1'-0" o.c.
4. If two or more flashings are required, lap the flashing over the previously installed flashing by a minimum of 2" placing a bead
of tube sealant between the flashings and securing with pop rivets 2
1 /
2
" o.c.
Double Bead Tape Sealant
# 1 /
4
-14 x 7 /
8
" Stitch XL (1'-0" o.c.)
Clip-Loc Panel
Moisture Barrier (by others)
Cleat
#10-12 x 1" PHW (1'-0" o.c.)
Floating Rake Zee
Clip-Loc Rake
12-14 x 1 1 /
4
" Shoulder Tech (1'-0" o.c.)
1:12 Slope
Minimum
INSTALLATION NOTES