MTS Criterion 40 - Manual - Manual (Page 68)

MTS Criterion ® Series 40 Product Manual 68
Dual-Column Load Frames
Installation
4. Repeat Steps 2 and 3 for the right-side panel assembly (Item 5).
5. Use the M6 butt fasteners (Item 2) to connect the horizontal bar (Item 4) and
the side panel.
6. When the all of above components are aligned, hand-tighten all fasteners.
7. Place the back door (Item 7) into position with the door latch to the right
side and secure the hinges to the left-side panel’s hinges.
8. Adjust the latch to align exactly with the door catch as needed.
9. Remove the protective covering from the panels and door.
When the assembly is completed, the image below is the final effect.
Dual-Column Load Frame With Enclosure
Criterion_product manual.book Page 68 Monday, July 28, 2014 3:52 PM