MTS Criterion 40 - Manual - Manual (Page 76)

MTS Criterion ® Series 40 Product Manual 76
Installing Cables
Installation
J12 Digital I/O Insight
The J12 connector routes the Digital I/O from the MTS Insight control board to
J5 on the MTS Criterion interface board. The pin assignment below is only for
reference. The cable from J12 to J5 must be connected for system operation.
P IN S IGNAL
1 VCC
2 No Contact
3 DOUT3+
4 DOUT2+
5 DOUT1+
6 DIN3+
7 DIN2+
8 DIN1+
9 GND
10 DOUT3-
11 DOUT2-
12 DOUT1-
13 DIN3-
14 DIN2-
15 DIN1-
Criterion_product manual.book Page 76 Monday, July 28, 2014 3:52 PM