MTS Model 286-31 Transient Permeability Pore Pressure Intensifier - Manual (Page 44)

286.31 Transient Permeability Pore Pressure Intensifier 44
Running a Steady State Flow Test
Operation
Running a Steady State Flow Test
Running a steady state flow test has five major tasks
• Fill the Pressure Intensifier
• Purge and Fill the Pore Pressure Lines
• Refill the Pressure Intensifier
• Prepare to Run the Test
• End the Test
Note If you have just done a complete purge of the 286.31, skip ahead to
“Prepare to Run a Test” on page 56.