Running a transient permeability flow test, Running a transient permeability flow test 59 – MTS Model 286-31 Transient Permeability Pore Pressure Intensifier User Manual
Page 59
Advertising
![background image](/manuals/568028/59/background.png)
Running a Transient Permeability Flow Test
286.31 Transient Permeability Pore Pressure Intensifier
Operation
59
Running a Transient Permeability Flow Test
Performing a permeability flow test has five major tasks
•
Fill the Pressure Intensifier
•
Purge and Fill the Pore Pressure Lines
•
Refill the Pressure Intensifier
•
Prepare to Run the Test
•
End the Test
Note
If you have just done a complete purge of the 286.31, skip ahead to
Section 2.3.4. It begins on page 2-96.
Advertising