MTS Multipurpose Elite Test - Manual (Page 24)

3.2.4.0 Working with Test-Run Display Devices
When you start the test, you can see real-time test information on the Test-Run Display panel.
Add monitor display devices
To add monitor display devices to your test, click the Test-Run Display tab and drag monitor display devices
from the toolbox to the work area. When you do this, error icons on the device icon and Error list guide you
to define required properties. The following example shows a Signal Scope device, which simulates an
oscilloscope on the Test-Run Display tab when the test executes. To view its properties, you select the
Signal Scope device on the work area.
Signal Scope Monitor Display
3.2.5.0 Test Execution Overview
Using Station Manager with TestSuite software
The Station Manager application runs in the background alongside the MPE application. When you design
or run tests with the MPE application, minimize the Station Manager application to simplify your PC desktop.
The activities that an expert user may perform with the Station Manager application varies with your station
and test setup, but typically includes:
• Design and use profiles. This is done using the optional Profile Editor in the Station Manager application.
• Install new hardware resources. This is done using the Station Builder tool in the Station Manager
application.
24 Multipurpose Elite Test Design Guide
3.0 Designing a Test